Inflatable Repair Kit for Paddle Boards
★PVC Material&Perfect Repair-Made of PVC material the repair kit is waterproof safe strong and durable. Wait for about 10 minutes or use a hair dryer to blow the patch coated with glue as well as the glued part of the bad product until the glue is not sticky and a little dry directly paste the precut patch to the patch Place knock hard with a flat object After pressing for 12 hours with a heavy object reinflate and use do not immediately inflate to use.
★Easy to Use-You can quickly fill the holes through simple steps. Just squeeze and scrape (be sure to wear gloves). Repair Patche can cut it to a smaller size to meet your needs enough to repair a lot of thingsSuitable for repair of inflatable rafts swimming pools toys etc.
★Complete Kit-The package contains a special wrench, 2piece PVC repair patches, a special glue and a repair bucket.All the repair tools are in one kit, which lets you easily and quickly repair the damaged wall.
★Wide Functions-The air valve special wrench is used to remove and replace the air valve for inspection and repair of the hull.The paddle repair kit can be used on any inflatable paddle board or raft.
★100% Satisfied After-Sales Service-We always strive to provide you with the highest quality Drywall Repair Kit and offer a 100% free money-back guarantee. You can call us for a full refund or a free re-send; so you can buy with confidence.
★Packing List-1*Special Wrench
2 piece of PVC Patch(5.5in*5.5in)
1*Special Glue(100g)
1*Repair Bucket
★Instructions:-Completely clean the leaking parts to remove any dirt, dust and grease.
Cut a piece of leather from the patch of the repair kit, the leather should be a few centimeters larger than the damaged area, and then use a pencil to draw the pattern of the patch.
Brush the glue on the repaired area and the lower part of the repair piece. Apply it evenly and not too thick. Wait 2-4 minutes after painting, until the glue becomes sticky.
Stick the glued side of the patch to the damaged area, press hard, wait 12 hours until the glue is fully bonded, and then apply glue to the sides of the patch. After 4 hours, the repair work was completed.
